Panasonic AW-PH360N 사용자 설명서

- 14 -

$

The pan/tilt head’s camera mounting section has a mechanism for maintaining the
camera’s balance that moves the camera mounting plate using a guide roller as a fulcrum.
Use the described recommended lenses corresponding to the camera to be used.
(Before mounting a lens other than recommended lenses, consult with your dealer.)

1. Change the position of guide pin 

A

and/or the camera mounting screws in accordance

with the following installation of the pan/tilt head before mounting the camera.

2. Adjust the balance by loosening the guide screws and moving the camera mounting plate.
3. Upon confirming the position where the balance is maintained, firmly tighten the guide

screws. If the balance cannot be maintained, change the position of guide pin 

B

or the

positions of the guide screws, and adjust the balance again.

O

The guide roller is fixed in place. Do not remove the guide roller screw.

B

A

B

A

A