Panasonic AW-PH360N 사용자 설명서
- 4 -
O
This is a compact stand-alone type of
pan/tilt head which is capable of rotating
95 degrees upward and downward and
300 degrees on the horizontal.
pan/tilt head which is capable of rotating
95 degrees upward and downward and
300 degrees on the horizontal.
O
This pan/tilt head can bear a total weight
of up to 8.8 lb (4 kg) for the camera and
lens combined.
of up to 8.8 lb (4 kg) for the camera and
lens combined.
O
The pan/tilt head can be controlled using
the controllers AW-RP301, AW-RP305,
AW-RP501, AW-RP505, AW-RP605A,
AW-RP400 or a personal computer.
the controllers AW-RP301, AW-RP305,
AW-RP501, AW-RP505, AW-RP605A,
AW-RP400 or a personal computer.
O
The positions and settings for shooting
up to 50 points can be entered as data
into the preset memory.
up to 50 points can be entered as data
into the preset memory.
Camera cable .................................... (
!
1)
Tilting arm ......................................... (
!
1)
Tilting arm fixing screws
M4
!
12 mm ................................... (
!
4)
Safety chain ...................................... (
!
1)
Chain attachment screws
(with flat and spring washers)
(with flat and spring washers)
M4
!
8 mm ..................................... (
!
1)
M4
!
6 mm ..................................... (
!
1)
M2.6
!
6 mm .................................. (
!
1)
Please check the following accessories have been provided.
Introduction ........................................... 4
Accessories ........................................... 4
Installation precautions ........................ 5
Precautions for use .............................. 6
Parts and their functions ...................... 7
Installation ............................................. 9
$
Assembling the pan/tilt head ............ 9
$
Controller selection switch / installation
direction switch /
landing characteristics settings . 10
landing characteristics settings . 10
$
Transmission signal
selection setting .......................... 11
$
Setting the cable compensation
circuit of video signals ............... 12
$
Installing the pan/tilt head .............. 13
$
Mounting the camera ..................... 14
Connections ........................................ 18
$
Connecting the connector panel .... 18
$
Head connector panel .................... 23
$
Connecting the base connector
rear panel and the base
connector front panel ................. 24
connector front panel ................. 24
$
Connecting the AC adapter for use
with the pan/tilt head ................. 26
$
Connection examples .................... 27
Limiters ................................................ 43
$
Setting/releasing the limiters .......... 44
Replacement of consumable parts ... 47
Specifications ...................................... 48
Contents
Introduction
Accessories