Panasonic AW-PH360N 사용자 설명서
- 48 -
Specifications
Power supply:
DC +12 V (connector)
Power consumption: DC +12 V 3 A (camera power included),
DC +12 V 1.3 A (pan/tilt head only)
1
indicates safety information.
Genlock input:
Black burst or composite video (BNC connector)
Camera video output:
Video: 75
Ω
(BNC connector)
Y:
75
Ω
(BNC connector)
Pr:
75
Ω
(BNC connector) (Switchable to SDI)
Pb:
75
Ω
(BNC connector)
SDI:
BNC connector (Switchable to Pr)
Camera / pan/tilt head control:
• Controller (AW-RP301/AW-RP305)
Pan/tilt head control: RS-422 (RJ-45, modular jack)
• Controller (AW-RP501/AW-RP505)
Pan/tilt head control: RS-422 (RJ-45, modular jack)
Camera control: Interactive serial communication (BNC connector)
• Controller (AW-RP605A)
Camera / Pan/tilt head control: RS-422 (RJ-45, modular jack)
• Controller (AW-RP400)
Camera / Pan/tilt head control: RS-485 (RJ-45, modular jack)
• Controller (Personal computer, etc.)
Camera / Pan/tilt head control: RS-232C (28 pin, half pitch connector)
Lamp control:
Control signals (connector)
Option control:
Control signals (connector)
Maximum cable length:
• Controller (AW-RP301/AW-RP305/AW-RP501/AW-RP505/AW-RP400)
500 m (with BELDEN 8281 coaxial cable, 10BASE-T straight cable equivalent to
UTP category 5)
• Controller (AW-RP605A)
1000 m (with BELDEN 8281 coaxial cable, 10BASE-T straight cable equivalent to
UTP category 5)
When the SDI signal is transmitted: 200 m with BELDEN 8281 coaxial cable
Maximum load capacity: 8.8 lb (4 kg)
Allowable operating temperature:
14°F to 113°F (–10°C to +45°C)