Panasonic BL-PA300A 사용자 설명서

17

Green, lit

The adaptor is successfully connected to the 

 network.

Green, flashing The terminal is being registered to the master.

Green, flashes 
once every 5 
seconds

The adaptor is registered to the master, but it is 
not connected to the 

 network.

Red, lit for 5 
seconds

There was an error during registration. Try 
again.

Red, lit

The adaptor is not functioning properly and 
cannot communicate over the 

 

network. Contact an authorized Panasonic 
service center.

Off

The adaptor is not plugged in.
The adaptor is not connected to the 

 

network (no other adaptors found, not 
configured, etc.).

Green, lit

A LAN cable is connected to the adaptor.

Green, flashing Data is being sent/received.

Orange, lit

There is no network device connected to the 
adaptor via the LAN cable, or the network 
device is not turned on.

Off

The adaptor is not plugged in.
Power Save is active. (See page 13)

Green, lit

The adaptor is configured as the master.

Green, flashes 
for 10 seconds

A terminal has been successfully registered to 
the master.

Off

The adaptor is not configured as the master.

BL-PA300A_OI.book  Page 17  Wednesday, August 6, 2008  9:59 AM