Panasonic WV-NP1004 사용자 설명서

52

Select the method of the flange-back length adjustment and adjust the flange-back length minutely. The settings can
be configured on the "BACK-FOCUS SETUP" page. Before adjusting the flange-back length, adjust the lens first. 
(

☞ Operating instructions (book))

Refer to the operating instructions (book) for descriptions of how to display the "BACK-FOCUS SETUP" page.

The flange-back length is the distance between flange surface and the focal point.

• The "ABF" (auto back focus) function is for adjustment of the flange-back length at the installation, and for focus

compensation when shifting between colo

ur and B/W after the installation. This function is not supposed to be

used for sequential action such as the auto focus function.

• It is necessary to adjust the flange-back length again when images become out-of-focus caused by aging of the

lens and the environment change, etc.

The flange-back length adjustment can be performed using the operation buttons on the camera (

☞ Operating

instructions (book)).

[ABF]
When the [SET] button is pressed after moving the cur-
sor onto "PUSH SW", the auto-back focus function will
be activated and adjust automatically the flange-back
length to a subject located at the cent

re of the screen.

[MANUAL-ADJ]
To adjust the flange-back length finely, press the [SET]
button after moving the cursor onto "MANUAL-ADJ".
The flange-back length can be adjusted manually using
the [Left] and [Right] buttons.

• The flange-back length position will set to the default

position for the CS-mount by pressing both the [Left]
and [Right] buttons for 2 seconds or more.

• A value displayed for "INDICATOR" is an indication

for the flange-back length adjustment. When the
value becomes larger, the displayed image will be
sharper.

←→ B/W]

Select a method of the flange-back length adjustment
from the following.
AUTO: Adjusts the flange-back length automatically to

correct out-of-focus which may be caused when
switching between the colo

ur image display and the

BW image display. 

PRESET: When switching between the colo

ur mode and

the B/W mode, the flange-back length position will
move to the preset position of each mode. The latest
adjusted flange-back length positions for each mode
will be memorized automatically as the preset posi-
tion.

FIX: The position will be fixed after adjusting the flange-

back length manually or using the auto back focus
function (ABF).

Default: AUTO

• "ABF" is available only when "OFF", "X2 AUTO" or "X2 FIX" is selected for

"SENS UP". 

• "AUTO" of "C/L 

←→ B/W" is available only when "OFF", "X2 AUTO" or "X2 FIX"

is selected for "SENS UP". 

|.........