Panasonic KX-HGC200 사용자 설명서

For assistance, please call: 1-800-272-7033

“

When you insert
KX-HGC200 to the PC card
slot, the Install wizard
screen is not displayed. 

The computer does not
operate even if you insert
KX-HGC200.

You cannot install the
KX-HGC200 device driver.

The Network management
web screen is not
displayed.

You cannot connect with
the computer.

You cannot connect with
the Broadband Networking
Gateway.

≥

The KX-HGC200 may not be inserted
properly. Insert it again firmly to the
end.

≥

The PC card socket may not be
working properly. After checking its
operation, insert KX-HGC200 again
firmly to the end.

≥

The Power Management Function
(automatic shutoff function) of the
computer may disturb the power
supply to KX-HGC200. Confirm the
function according to the manual of
the computer.

≥

The cancellation of the device driver
installation has left some driver files in
the computer.It hinders the
re-installation of the device driver.
Un-install the KX-HGC200 software
completely by using the un-installation
software which was installed during
the installation of the KX-HGC200
device driver.

≥

KX-HGC200 may not be inserted
properly. Insert it again firmly to the
end.

≥

The PC card socket may not be
working properly. Check its operation.

≥

KX-HGC200 may not be inserted
properly. Insert it again firmly to the
end.

≥

The PC card socket may not be
working properly. Check its operation.

≥

The version of the firmware of the
Broadband Networking Gateway may
be old or improper to that of
KX-HGC200. Check each versions.

PQQX12925ZA  01.2.27 3:56 PM  ページ 69