Panasonic PQQW15408ZA 사용자 설명서

–

 2 

–

Why call waiting 
does not work when 
I press {RECALL}?

L

You may be required to change the recall time to “90ms”. 
(Default: “100ms”)

L

Make sure you have subscribed to the call waiting service. 
Consult your service provider/telephone company.

How do I charge the 
battery?

L

Make sure that the battery is properly installed in the handset 
and the cover is closed. Place the handset on the base unit or 
charger and confirm “Charging” is displayed.

L

It takes approx. 7 hours to charge the empty battery (see front 
page). When it is fully charged, “Charge completed” is 
displayed.

Can I leave the 
handset on the 
base unit or charger 
after battery is fully 
charged or each 
call is finished?

L

You can place the handset on the base unit or charger 
anytime. Battery is not overcharged and there is no damage 
to the battery. By placing the handset on the base unit or 
charger, it is always fully charged.

Where can I buy 
new battery?

L

Battery can be purchased through your local retailer.

What is the range/
distance of my 
cordless phone? 
(Why am I getting 
short or poor range/
distance on my 
cordless phone?)
Why is “No link 
to base.” 
displayed on the 
handset when I 
press {C}?

L

Range/distance is related to technology and environmental 
factors. Therefore we cannot provide a given range or 
distance.

L

Make sure that the AC adaptor is properly connected to wall 
socket and to the base unit and that beep tones sound when 
you page the handset from the base unit.

L

Move closer to the base unit (Allow up to 60 seconds for the 
handset to reassign to the base unit.). 

L

If you try manual registration process, allow up to 60 seconds 
for the handset to reassign to the base unit.

L

If the above remedies do not solve the problem, refer to the 
troubleshooting section in your Operating Instructions for 
more information.

TG6700AL_FAQ_Leaflet.fm  Page 2  Monday, May 15, 2006  4:33 PM