Toshiba GN-1010 사용자 설명서
28
GN-1010 User’s Manual — Functions of the Utility Software
(*1) : Factory default setting for IP address
Unique value is set by using the lower 3 bytes in 6 bytes of Ethernet address.
Ex.: Ethernet Address
Ex.: Ethernet Address
IP Address
00-80-4C-01-02-03
→
10.1.2.3
00-80-4C-0D-0E-0F
→
10.13.14.15
The first portion “10” is the same.
(*2) : When you use only the GN-1010 as a wireless device, the setting is not
required. However, when using the GN-1010 together with other wireless
devices or using it on the far side of an IP router, you must set these items.
Wireless
Parame-
Parame-
ters
Channel
Setting is
not allowed.
(10)
Selects the number of wireless channels. The channels of
12 to 14 cannot be used even if selected.
12 to 14 cannot be used even if selected.
•
1 to 11
*
Setting method differs depending on "Extented Roaming"
setting.
setting.
Extended
Roaming
Station
Access Point
Disabled
Auto
One channel only
Enabled
Multi-channel
is allowed.
One channel only
ESS ID
LocalGroup Enters the name of wireless LAN network on which the
device belongs.
•
Up to 32 alphanumerics (case-sensitive)
*
Communication between the wireless devices with
different names is not possible.
Network can be split by changing the name.
different names is not possible.
Network can be split by changing the name.
ANY ID
Blocking
Disabled
Determines whether or not the log-in from a station which
has no ESS ID is refused.
has no ESS ID is refused.
•
Enabled/Disabled
*
When "Enable" is set, the log-in from a device which has
no ESS ID will be refused.
no ESS ID will be refused.
Transmit
Rate
Auto (All)
Selects transmit speed of the wireless transmission side.
•
1Mb/s
•
2Mb/s
•
Auto (1Mb/s, 2Mb/s)
•
5.5Mb/s
•
11Mb/s
•
Auto (All)
Age Time
5 min.
Selects time (minutes) to keep the wireless device informa-
tion (for AP only) and the MAC address information of the
bridge, which are internally managed.
tion (for AP only) and the MAC address information of the
bridge, which are internally managed.
•
3 to 65535
*
If no communication occurs within the time set here, the
information will be deleted.
information will be deleted.
Static Node
Address
Setting is
not allowed.
Sets the MAC address of PC connected to Ethernet side.
(For a station of “Infrastructure (Wi-Fi Mode)“)
(For a station of “Infrastructure (Wi-Fi Mode)“)
•
Without MAC Address Designation
•
With MAC Address Designation
*
If the MAC address is not designated, it will be automati-
cally obtained from the communication data on Ethernet.
cally obtained from the communication data on Ethernet.
Classifi-
cation
Parameter
Default
Value
Description