TP-LINK TL-PA2030 사용자 설명서

 

6

 

To ensure the optimum performance of the Powerline Adapter and significantly improve the transmission 
capacity of the network, we recommend that you comply with the following connection rule:   

y

 

Plug the Powerline Adapter directly into a wall socket but not the multiple sockets.   

 

For those computers you wish to be networked by Powerline Adapter, each of the computers must be 
properly connected with a Powerline Adapter through an Ethernet (RJ45) cable. 

Following are the steps to properly connect the Powerline Adapter to your computer: 

1． Connect one end of the provided Ethernet (RJ45) cable to an Ethernet port of the Powerline Adapter. 

2． Connect the other end of the Ethernet (RJ45) cable to you computer’s LAN port. 

3． Plug the Powerline Adapter into a wall socket next to the computer. 

4． Turn on your computer. 

5． Check and confirm that the Power LED 

  and Ethernet LED 

  on the Powerline Adapter are 

ON. 

The hardware connection mechanism is shown below: