Texas Instruments TLV320AIC3107EVM-K 사용자 설명서
2.1.1
USB-MODEVM Interface Board
EVM Position 2
EVM Position 1
TLV320AIC3107EVM
Control Interface
TLV320AIC3107
TAS1020B
USB 8051
Microcontroller
USB
I C
2
I S
2
Audio Interface
USB-MODEVM
EVM Description and Basics
www.ti.com
The simple diagram of
shows only the basic features of the USB-MODEVM Interface board.
When connecting the TLV320AIC3107EVM to the USB-MODEVM, use care to avoid bending the
connecting pins. The two boards can only be connected in one way. It is suggested to first align with the
10-pin connectors (J3 on the TLV320AIC3107EVM and J18A on the USB-MODEVM) and then gently
push all the connectors together until the boards are seated.
connecting pins. The two boards can only be connected in one way. It is suggested to first align with the
10-pin connectors (J3 on the TLV320AIC3107EVM and J18A on the USB-MODEVM) and then gently
push all the connectors together until the boards are seated.
In the factory configuration, the board is ready to use with the TLV320AIC3107EVM. To view all the
functions and configuration options available on the USB-MODEVM board, see the USB-MODEVM
Interface Board schematic in
functions and configuration options available on the USB-MODEVM board, see the USB-MODEVM
Interface Board schematic in
E.
Figure 1. TLV320AIC3107EVM-K Block Diagram
TLV320AIC3107EVM-K
4
SLAU261 – November 2008