Sony STRDG720 사용자 설명서

Measurement starts in 5 seconds and the 
display changes as follows:
A.CAL [5] 

t A.CAL [4] t A.CAL [3] 

t A.CAL [2] t A.CAL [1]
While the time is counting down, stand 
away from the measurement area to avoid 
measurement error.

The measurement process will take a few 
minutes to complete.
The table below shows the display when 
measurement starts.

* The corresponding speaker indicator lights 

up in the display during measurement.

“COMPLETE” appears on the display 
and the settings are registered.

Disconnect the optimizer microphone from the 
AUTO CAL MIC jack.

• Auto Calibration cannot detect the sub woofer. 

Therefore, all sub woofer settings will be 
maintained.

• If you have changed the position of the speakers, it 

is recommended that you perform Auto Calibration 
again in order to enjoy the surround sound.

?/1

-

.

<

<

>

O

TV ?/1 

AV ?/1

Input 
buttons

?/1 
switch

MUTING

MASTER 
VOL +/–

Environment noise 
level

NOISE.CHK

Speaker connection MEASURE and SP 

DET. appears 
alternately*

Speaker level

MEASURE and GAIN 
appears alternately*

Speaker distance

MEASURE and 
DISTANCE appears 
alternately*