Netgear RND 2175 사용자 설명서
NETGEAR ReadyNAS Duo User Guide
1-22
Configuring Your ReadyNAS Duo
v1.1, April 2008
First, power down the ReadyNAS Duo, replace the first disk with the large-capacity disk, and then
reboot. If your ReadyNAS Duo supports hot-swapping, you can hot-swap the disk without
powering down. The ReadyNAS Duo will detect that a new disk was put in place and
resynchronizes the disk with data from the removed disk. This process takes several hours,
depending on disk capacity. The disk is initialized and scanned for bad sectors first before the
rsync process is started. The total time from the start of initialization to the end of
resynchronization can be around 5 hours or more, depending on disk capacity. You will be notified
by e-mail upon completion.
reboot. If your ReadyNAS Duo supports hot-swapping, you can hot-swap the disk without
powering down. The ReadyNAS Duo will detect that a new disk was put in place and
resynchronizes the disk with data from the removed disk. This process takes several hours,
depending on disk capacity. The disk is initialized and scanned for bad sectors first before the
rsync process is started. The total time from the start of initialization to the end of
resynchronization can be around 5 hours or more, depending on disk capacity. You will be notified
by e-mail upon completion.
USB Storage
The USB tab displays the USB disk and flash devices connected to the ReadyNAS Duo, and offers
various options for these devices. A flash device appears as USB_FLASH_1 and a disk device
appears as USB_HDD_1. If you have multiple devices, they appear appended by an increasing
device number; for example, USB_HDD_2. If the device contains multiple partitions, the
partitions are listed beneath the main device entry.
various options for these devices. A flash device appears as USB_FLASH_1 and a disk device
appears as USB_HDD_1. If you have multiple devices, they appear appended by an increasing
device number; for example, USB_HDD_2. If the device contains multiple partitions, the
partitions are listed beneath the main device entry.
Partitions on the storage devices must be one of the following file system formats:
•
FAT32
•
NTFS
•
Ext2
•
Ext3
Figure 1-27