Netgear WG302v2 사용자 설명서

Basic Installation and Configuration

2-21

The following list describes the RADIUS Server Settings:

•

Authentication Server Configuration. This configuration is required for authentication and 
access control using a RADIUS Server.The IP Address, Port Number and Shared Secret are 
required for communication with the RADIUS Server. You can configure a Secondary 
RADIUS Server to use if the Primary RADIUS Server fails.

•

IP Address. The IP address of the RADIUS Server. The default is 0.0.0.0.

•

Port Number. The port number of the RADIUS Server. The default is 1812.

•

Shared Secret. This is shared between the Wireless Access Point and the RADIUS Server 
while authenticating the supplicant (wireless client). The shared secret can contain up to 63 
standard alphanumeric and special characters. The shared secret is case sensitive.

•

Accounting Server Configuration. This configuration is required for accounting using a 
RADIUS Server. The IP Address, Port Number and Shared Secret are required for 
communication with the RADIUS Server. You can configure a Secondary RADIUS Server to 
use if the Primary RADIUS Server fails.

•

IP Address. The IP address of the RADIUS Server. The default is 0.0.0.0.

•

Port Number. Port number of the RADIUS Server. The default is 1813.

•

Shared Secret. This is shared between the Wireless Access Point and the RADIUS Server 
while authenticating the supplicant.

To restrict access based on MAC addresses, use the following steps:

1. Connect to the WG302v2 by entering the IP address of the WG302v2 into the address field of 

your Web browser. 

2. From the Security menu, click the Access Control link to display the Access Control menu 

shown in