Netgear WG302v2 사용자 설명서
Specifications
B-1
v1.0, May 2006
Appendix B
Specifications
This appendix provides default factory settings and technical specifications for the ProSafe
802.11g Wireless Access Point.
802.11g Wireless Access Point.
Default Factory Settings
You can use the reset button located on the rear panel of your device to reset all settings to their
factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button
for three seconds. Your device will return to the factory configuration settings shown in
factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button
for three seconds. Your device will return to the factory configuration settings shown in
Table B-1 Access Point Default Configuration Settings
Feature
Description
AP Login
User Login URL
192.168.0.228
User Name (case sensitive)
admin
Login Password (case sensitive)
password
Ethernet Connection
Ethernet MAC Address
See bottom label.
Port Speed
10/100
Basic Settings
AP Name
netgearxxxxxx, where xxxxxx are the last six digits of the
wireless access point's MAC address
wireless access point's MAC address
Country / Region
United States (in North America; otherwise, varies by
region)
region)
IP Address
192.168.0.228
Subnet Mask
255.255.255.0
DHCP Client
Disabled
Spanning Tree Protocol
Enabled
VLAN (802.1Q)
Enabled