Netgear WG302v2 사용자 설명서

C-8

Command Line Reference

The commands in 

 correspond to the Wireless Settings page on the Web UI.

Set the Primary DNS Server

set host static-dns-1 <ip_address>

Example:

set host static-dns-1 10.10.3.10

Set the Secondary DNS Server

set host static-dns-2 <ip_address>

Enable Spanning Tree Protocol

set interface brvlan1 stp on

Disable Spanning Tree Protocol

set interface brvlan1 stp off

Set the Management VLAN ID

set management vlan-id <1-4096>

Enable Untagged VLANs and set 
the VLAN ID 

set untagged-vlan untagged-vlan-id <1-4096>

Set the Time Zone

set ntp timezone <timezone>

Enable the NTP Server

set ntp status up

Disable the NTP Server

set ntp status down

Use a custom NTP server

set ntp use-default-servers off

Use the default NTP server

set ntp use-default-servers on

Set the Hostname or IP Address 
for the custom NTP server

Note: You can set a primary and 
secondary NTP server.

set ntp-servers [primary | secondary] server 
[<hostname> | <ip_address

>]

set ntp-serves primary ntp.foo.com

or

set ntp-servers primary server 192.168.1.10

View the Current Time

date

Turn on the Radio

set interface wlan0 status up

Turn off the Radio

set interface wlan0 status down