Netgear WG111V2 사용자 설명서

2

In general, wireless devices can communicate through walls. However, if the walls are constructed 
with concrete, or have metal, or metal mesh, the effective range will decrease if such materials are 
between the devices.

The product package should contain the following items:

•

NETGEAR 54 Mbps Wireless USB2.0 Adapter WG111v2

•

Installation Guide 

•

Plastic cradle and fasteners to hold the WG111v2

•

NETGEAR CD, including:

–

Driver and Configuration Utility Software

–

This User Manual

•

Warranty and Support information card

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the 
carton, including the original packing materials, in case you need to return the product.

If this is a new wireless network installation, use the factory default settings to set up the network 
and verify wireless connectivity. If this is an addition to an existing wireless network, you need the 
wireless network and wireless security settings that are already defined. 

Your Wireless Adapter factory default basic settings are: 

•

Network Name Service Set Identification (SSID): ANY

•

Network Mode (Infrastructure or Ad-hoc): Infrastructure

•

Data security WEP, WPA2-PSK, or WPA-PSK encryption: Disabled

The section below provides instructions for setting up the Wireless Adapter for basic wireless 
connectivity to an access point. 

Note: In order for the Wireless Adapter to communicate with a wireless access point 

or wireless adapter, all devices must be set up to use the same wireless network 
name (SSID).