Netgear WG111V2 사용자 설명서

20

Many networks use wireless security to encrypt wireless data communications. If you try to 
connect to a network with wireless security the Smart Wizard detects it. Before you can use that 
network you must set up the Wireless Adapter with the same SSID, wireless security, and security 
settings as that network. If you do not know what these are, contact the person who set up the 
network.

The Wireless Adapter supports the following types of wireless security:

•

Wi-Fi Protected Access 2 Pre-Shared Key (WPA2-PSK)

•

Wi-Fi Protected Access Pre-Shared Key (WPA-PSK)

•

Wired Equivalent Privacy (WEP)

For more information about wireless security, see the Web link to 

 or the wireless reference document at: 

In addition to the wireless security features, networks should use LAN network security features 
such as requiring a user name and password to access the shared resources in the network.

The procedures below explain how to configure the wireless encryption settings of your Wireless 
Adapter. 

You will need to know the settings for your wireless network. The form on the next page is set up 
so that you can record this information. You can use either of these two methods to keep track of 
these settings:

•

Print the form on the next page and fill it out. If you are uncomfortable writing out secure 
information, put a “hint” to yourself instead of the actual information. Put the form where it 
will be very easy for you to remember, or save two copies and put them in different places.

•

Save the information in a document on your computer. Later you can search for words such as 
SSID to locate the information.