Netgear WN121T 사용자 설명서

2-15

Follow the steps below to configure WPA-PSK Security.

1. Run the Wireless USB 2.0 Adapter Smart Wizard.

a. Make sure the software is installed and the Wireless USB 2.0 Adapter is fully inserted in a 

USB port in your computer.

b. Use the 

 icon to open the Smart Wizard. The Settings tab page opens.

2. Configure the Security settings. 

a. In the Profile box, select the profile or type in a profile name.

b. In the Network Name (SSID) field select the network, or enter the SSID.

In the Security section, select WPA-PSK [TKIP].

For more information on WPA security, see the Web link to 

.

3. Save your settings in a Profile. 

a. Click Save Profile. All the configuration settings are saved in this profile. 

b. Click Apply. 

Note: You will not get a wireless network connection unless the network SSID 

matches exactly what is configured in the access point.