Netgear XAVB101V2 전단

© 2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks 

of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are 

trademarks or registered trademarks of their respective holders. Information is subject to change without 

notice. 

Item

Description

Power 
LED

• Solid green. The electrical power is on.
• Blinking green. The adapter is restarting or setting up security.
• Amber. Power saving mode.
• Off. There is no electrical power.

Powerline 
LED 

• Solid. The adapter is connected to a Powerline network.
• Blinking. The adapter is sending or receiving data.
• Off. The adapter has not found any other compatible Powerline devices using 

the same encryption key.

The Pick A Plug feature lets you pick the electrical outlet with the strongest link 
rate, indicated by the color displayed by the LED:

Green: 
Link rate > 80 Mbps 
(Best)

Amber: 
Link rate > 50 and < 80 Mbps 
(Better)

Red:
Link rate < 50 Mbps 
(Good)

Ethernet 
LED 

• Solid. The Ethernet port is linked, but there is no activity.
• Blinking. There is traffic on the Ethernet port.
• Off. There is no Ethernet connection.

Power LED

Security/Power button

Ethernet port

Factory Reset

Powerline LED

Ethernet LED

The Security/Power button serves a dual function:

•

Set the Power Mode: The Powerline Adapter’s normal state is POWER ON. 
When you first plug it into an electrical outlet, it will be in POWER ON mode. To 
go to POWER OFF (power saving mode), push and hold the button for 5 – 10 
seconds. Pressing the button again returns it to POWER ON. You can also unplug 
and plug in the adapter to restore it to POWER ON.

•

Set Security: Press and hold the button for 2 – 4 seconds. If you are setting up 
two XAV101v2 devices, push the button on each device for 2 – 4 seconds within 
2 minutes. The two devices will connect automatically and the Power LED will start 
blinking.

Warning: Do not press the Security button on the Powerline adapter(s) until 
installation is complete and the adapters are communicating with each other 
(indicated by the blinking Powerline LED). Pressing this button too soon can 
temporarily disable Powerline communication. If this should occur, use the Factory 
Reset button to return the Powerline adapter to its factory default settings.

To set security on your Powerline adapters, see the XAV101v2 Powerline AV 
200 Adapter Kit User Manual, available at 

Power LED is off

• Make sure that power is supplied to the electrical outlet, and that the 

Powerline devices are not plugged into an extension cord, power strip, or 
surge protector. 

• Make sure the adapter is in POWER ON state. If you’re unsure, unplug and 

plug in the adapter to restore it to POWER ON state.

Powerline LED 
is off

• If you have set network security, make sure that all Power line devices are 

using the same encryption key; see the online 

User Manual for details.

• Press the Reset button on each device for 1 second to return the Powerline 

adapter to its factory default settings. 

Ethernet LED is 
not blinking

• Make sure that the Ethernet cables are working and securely plugged into 

the devices.

• Press the Reset button on each device for 1 second to return the Powerline 

adapter to its factory default settings. 

•

AC input: 100-240V~, 100mA

•

Operating temperature: 0C~40C

•

The socket-outlet shall be installed near the equipment and shall be easily 
accessible.

Thank you for selecting NETGEAR products. 

After installing your device, locate the serial number on the label of your product and 
use it to register your product at 

 Registration is 

required before you can use our telephone support service. Registration via our 
website is strongly recommended.

To access the XAV101v2 utility, go to 

.

for product updates and Web support.