Pioneer DRM-6NX 사용자 설명서
<DRB1239>
10
Connections
Before making or changing the connections, switch
off the power switch and disconnect the power
cord from the AC outlet.
off the power switch and disconnect the power
cord from the AC outlet.
Ethernet
Hub
SCSI cable
PIONEER CD/DVD-ROM drives
RJ-45 connector
10BASE-T/
100BASE-TX
10BASE-T/
100BASE-TX
Power cable
The accessory power cable is for use in North America.
In other regions, please consult your dealer for
information on how to purchase a power cable.
The accessory power cable is for use in North America.
In other regions, please consult your dealer for
information on how to purchase a power cable.
To AC wall outlet
Connect to a wall outlet. This unit is
designed to operate at AC 110 – 240 V
50/60 Hz. (There is no power supply
voltage switch because switchover
takes place automatically inside the unit.)
designed to operate at AC 110 – 240 V
50/60 Hz. (There is no power supply
voltage switch because switchover
takes place automatically inside the unit.)
Turn off SCSI terminator No. 1 when disk
drives are connected to the SCSI terminal.
Then turn on the terminator of the connected
disk drive.
drives are connected to the SCSI terminal.
Then turn on the terminator of the connected
disk drive.
NOTE:
Assign SCSI IDs 2 to 6 to drives
connected to the SCSI terminal.
Assign SCSI IDs 2 to 6 to drives
connected to the SCSI terminal.