Netgear WNDA3100 사용자 설명서

2-12

To configure WPA-PSK security:

1. Run the WNDA3100 Smart Wizard.

a. Make sure that the WNDA3100 software is installed and the wireless USB adapter is fully 

inserted in a USB port in your computer.

b. Use the 

 icon to open the Smart Wizard. The Settings tab displays:

2. Configure the Security settings. 

a. In the Profile field, select the profile, or type in a profile name.

b. In the Network Name (SSID) field, and then select the network, or enter the SSID.

In the Security section, select WPA2-PSK [AES], and enter the passphrase.

For more about WPA2-PSK, see the link to 

3. Save your settings in a profile. 

a. Click the Save Profile button. All the configuration settings are saved in this profile. 

b. Click Apply, and then click Close to exit the Smart Wizard.

Note: You will not get a wireless network connection unless the network SSID 

matches exactly what is configured in the access point.