Netgear WNDA3100 사용자 설명서

다운로드
페이지 58
NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual
2-17
v1.0, December 2007
Advanced Settings
You can use the Advanced Settings screen to configure the preamble (GHz) that the adapter uses. 
The available settings are Auto, 2.4 GHz, and 5 GHz. You can use the 5GHz range to avoid 
interference in the 2.4GHz range. The 2.4GHz range is commonly used by cordless telephones. 
By changing the preamble setting, you have the option to connect to the following types of 
wireless networks.
2.4 GHz + 5GHz. Connect to both 2.4GHz and 5GHz access points, up to 300 Mpbs.
2.4 GHz only. Connect only to 2.4GHz access points, up to 300 Mpbs.
5 GHz only. Connect only to 5 GHz access points, up
 to 300 Mpbs.
2.4 GHz. Connect to 802.11b/g access points, up to 54 Mbps.
5 GHz. Connect to 802.11a access points, up to 54 Mbps.
To change the preamble (GHz) setting:
1. On the Settings tab, click the Advanced Settings button to display the following screen.:
Note: The default settings for the Fragmentation Threshold field and RTS/CTS 
Threshold field usually work fine. Do not change them unless you have a specific 
reason to do so.
Figure 2-13
Note: for Windows Vista computers, you must have administrator rights. Otherwise, 
this option is not available for selection.