Netgear 7200 Series 사용자 설명서

Switching Commands

7-59

This command sets the maximum number of times a request packet is retransmitted when no 
response is received from the RADIUS server. The maxretransmit value is an integer in the range 
of 1 and 15.

 

Consideration to maximum delay time should be given when configuring RADIUS maxretransmit 
and RADIUS timeout. If multiple RADIUS servers are configured, the max retransmit value on 
each will be exhausted before the next server is attempted. A retransmit will not occur until the 
configured timeout value on that server has passed without a response from the RADIUS server. 
Therefore, the maximum delay in receiving a response from the RADIUS application equals the 
sum of (retransmit times timeout) for all configured servers. If the RADIUS request was generated 
by a user login attempt, all user interfaces will be blocked until the RADIUS application returns a 
response.

4

This command sets the timeout value (in seconds) after which a request must be retransmitted to 
the radius server if no response is received. The timeout value is an integer in the range of 1 and 
30. 

Consideration to maximum delay time should be given when configuring RADIUS maxretransmit 
and RADIUS timeout. If multiple RADIUS servers are configured, the max retransmit value on 
each will be exhausted before the next server is attempted. A retransmit will not occur until the 
configured timeout value on that server has passed without a response from the RADIUS server. 
Therefore, the maximum delay in receiving a response from the RADIUS application equals the 
sum of (retransmit times timeout) for all configured servers. If the RADIUS request was generated 
by a user login attempt, all user interfaces will be blocked until the RADIUS application returns a 
response.

5

This command enables or disables the RADIUS accounting function. 

disable