Netcomm NP1100 사용자 설명서

NP1100 10/100Mbps PCI Bus Fast Ethernet Card 

3

YML567 Rev2 

The 10/100Mbps PCI bus Fast Ethernet Card requires Hardware installation first, then

BIOS and Driver installation.

1.  Turn off your computer and disconnect the power cable.
2.  Remove the cover from your computer. 
  Please check your computer’s documentation (particularly your warranty details) for 

instructions and warnings regarding the removal of covers or installation of add-in 

boards.

3.  Select an empty PCI slot and remove 

the appropriate expansion slot cover 

from the computer.

4.  Insert the card into the PCI slot and 

secure with a screw in the backplane.

5.  If supplied connect the WOL 

(wake on LAN) cable to the WOL 

connector on the card and on your 

motherboard.

6.  Replace the computer’s cover.
7.  Insert one end of the network cable 

into the socket on the PCI Network 

Card.