Verizon 7500 사용자 설명서

 

 

 

 
 

030-300536 Rev. A 

11 

     August 2007 

installed in a PC or Hub at the same time, only the 
connector that syncs up first will be used. 

 

POWER 

 

Barrel connector 

Connects the 12 VDC power connector to an AC 
wall jack. 

 
 

 
This section explains the hardware installation procedures for installing your Router. 
 
To install the VersaLink, you will need the following: 
•  Active DSL line   

•  Network Interface Card (NIC) installed in your PC, or 

•  Available USB port installed in your PC 

•  802.11 b/g wireless adapter installed in your PC 

 
IMPORTANT: Please wait until you have received notification from your Internet service provider (ISP) that your 
DSL line has been activated before installing your VersaLink. 
 

 
Make sure that your kit contains the following items: 
 

•  Verizon

®

 ProLine™ Modem 

•  Power Supply 
•  Y-cable contains: 

o  Built-in 10/100 BaseT Ethernet cable—labeled PC/Ethernet, yellow 
o  Built-in USB cable—labeled PC/USB, blue 

•  RJ-11 Phone cable 
•  CD-ROM containing User Guide in PDF format 
 
 

 
ADSL signals must be blocked from reaching each telephone, answering machine, fax machine, computer Modem 
or any similar conventional device. Failure to do so may degrade telephone voice quality and ADSL performance. 
Install a microfilter if you desire to use the DSL-equipped line jack for telephone, answering machine, fax machine 
or other telephone device connections. Microfilter installation requires no tools or telephone rewiring. Just unplug 
the telephone device from the baseboard or wall mount and snap in a microfilter, next snap in the telephone device. 
You can purchase microfilters from your local electronics retailer, or contact the original provider of your DSL 
equipment.