Netcomm NP642 사용자 설명서

NP642 IEEE 802.11g PCI Adapter 

11

YML785 Rev1 

Before continuing with the Software Installation section, you will need to connect the 

antenna
1.  The antenna has a retaining nut which must be screwed into the connector on the back 

of the card.  Place the screw retaining nut over the antenna connection on the rear of 

the NB642 and turn it clockwise. 

Note: 

Do not over-tighten the attaching nut - but do make sure that 

you have screwed it all the way to its end. 

2.  Adjust the antenna to a 90o angle. 

Note: 

Please note that you may have to rotate the complete antenna 

assembly to do this and have the antenna pointing vertically. 

Screw 

retaining nut 

clockwise 

over the 

antenna 

connection 

Bend 

antenna  

to a 90

o 

angle