Viewsonic WMG120 사용자 설명서
ViewSonic Wireless Media Gateway
17
LAN (Primary Setup)
IP Address: The default is Gateway IP Setting. No change is
necessary.
Subnet Mask: The default is Gateway IP Setting. No change
is necessary.
Wireless (Primary Setup)
Mode: click the down arrow field for the drop-down menu
with a list of wireless networking modes. Select one of the
following modes based on your environment setting:
following modes based on your environment setting:
• 11b+g: If you have 802.11b and 802.11g devices in your
network, then keep the default setting, 11b+g.
• 11g Only: Default for optimal performance. If you have
802.11g devices, select 11g Only. This will give you the
best wireless performance.
best wireless performance.
Channel: change as needed (recommended) especially if
you experience interference with other wireless routers in the
vicinity.
vicinity.
SSID: the default “viewsonic” is automatically entered. No
change is necessary.
Security: select one.
Disable > click Apply > press Logout to close the
screen.
Enable > click Configure Security. The Wireless LAN
Configuration screen appears as shown on the next
page. Security Mode defaults to WEP.
screen.
Enable > click Configure Security. The Wireless LAN
Configuration screen appears as shown on the next
page. Security Mode defaults to WEP.
Wireless LAN Configuration
screen shown on the next page.
screen shown on the next page.