Viewsonic VS13789 사용자 설명서

 

ViewSonic  WPD-100 

21 

The length of WEP key depends on the type of WEP key 
you selected. You can input 10 or 26 hexadecimal 
characters and 5 or 13 ASCII characters as WEP key. 

Use 802.1x 

If the access point you wish to connect requires 802.1x 
authentication, please click on ‘Use 802.1x’ box, then click 
‘802.1X’ tab to set 802.1x parameters. 

 
To set 802.1x authentication for the access point. Please click ‘802.1X’ tab: 
 

 

 
Here are descriptions of every setup item: 
 
Item Name 

EAP Method 

Select 802.1x EAP method from dropdown menu. Please 
ask the administrator of the access point you wish to 
connect to select a correct EAP method. 

Tunnel 
Authentication 

Select 802.1x tunnel authentication type from dropdown 
menu. Please ask the administrator of the access point you 
wish to connect to select a correct tunnel authentication 
method. This pull down menu is only available when 
authentication type you use is 'PEAP', ‘TLS / Smart Card', or 
'TTLS'.  
 
When you use 'EAP-FAST' as authentication type, the 
protocol setting is always 'Generic Token Card' and can not 
be changed. You also need to select ‘Soft Token’ or ‘Static 
Password’ as password in ‘ID \ Password’ setting. 
 
’EAP Fast’ authentication type also have a sub-menu to set 
EAP fast-specific parameters: