Nokia 12 GSM MODULE REMOTE I/O 사용자 설명서

 

ERROR( Unknown Command )

Fail response, if NITZ network service is not supported 
and <time> value was more than 23 hours 59 minutes 
and 59 seconds: 

OUTPUT PULSE OFF <time>: 
ERROR( Network Time 
Missing ) 

The X refers to output pin number, 
X=1,2,3,4,5,6,7,8,9,all. 

The Y refers to either ON or OFF 

 

 

Command syntax for <time> parameter: 

<days>d<hours>h<minutes>m<seconds>s 

for example, Output_Pulse 1 On 5m30s 
Value ranges for <time> parameter: 

<time>

 

If Network Indication and Time Zone (NITZ) network service is 

supported, the range is from 1 second to 7 days.  

If NITZ network service is not supported, the range is from 1 second to 23 
hours 59 minutes and 59 seconds.  

<days>

 

If NITZ network service is supported, the range is from 1 … 7 

days.  

<hours>  

1…23 

<minutes> 1…59 

<seconds> 1…59 

Value examples for valid <time>:  

7d, 6d23h59m59s, 45m, 59s, 4h25s, 30m45s

, etc. 

Value examples for invalid <time>:  

7d1s

 

Maximum time (7 days) exceeded 

3m3m

 

There cannot be two unit fields of the same 

100s

 

Maximum second and minute value is 59. Use 1m40s instead 

24h

 

Maximum hour value is 23. Use 1d instead of 24h  

It is possible to cancel pulses before the <time> parameter defined in the pulse 
control message has passed. This is done with the “Output_Pulse_Cancel 

 

 

40/49