OKI 6020E 사용자 설명서
IV - 46
Section 4 - Chapter 6 - Telnet Configuration
OKI OkiLAN 6020e User’s Guide
Note: If you select an invalid subnet mask you may
not be able to access the OkiLAN 6020e. Use
this option with care!
this option with care!
Identify Default Gateway IP Address (Option 5)
If your local network is attached to other networks, you
must specify the address of your default gateway.
Whenever packets need to be sent to another network,
the default gateway is used.
must specify the address of your default gateway.
Whenever packets need to be sent to another network,
the default gateway is used.
The gateway address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255.
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255.
When the default gateway is changed, it will remain
undetected until the OkiLAN 6020e is reset or is power
cycled.
undetected until the OkiLAN 6020e is reset or is power
cycled.
Note: If you select an invalid default gateway or the
default gateway goes down, the OkiLAN
6020e may not be able to communicate with
non-local networks.
6020e may not be able to communicate with
non-local networks.
Configure Port (Option 6)
After the Configure menu appears, you can access the
following configuration option screens.
following configuration option screens.
Specify Configuration Page Language
This option enables you to select how the OkiLAN
6020e configuration pages should be printed: Text
(default), PCL, PostScript, or OFF.
6020e configuration pages should be printed: Text
(default), PCL, PostScript, or OFF.
Configure Language Switching
This option asks you to select the language of your
printer. For a description of language switching
options, see pages IV-28 and IV-29.
printer. For a description of language switching
options, see pages IV-28 and IV-29.