Nortel Networks R2MFC 사용자 설명서
60 Chapter 5 Configuring the R2MFC MBM
NN40010-300
The routes configured on the BCM are listed below the Routes heading.
6 Select the route that is to be configured under the Routes heading. See
The Route # information frame displays.
7 Select Overlap from the Service type drop-down list.
8 Repeat Steps
for every active B-channel that is provisioned for the corresponding E1.
There will be 30 channels, unless a partial E1 service is arranged with the CO.
See
for an example of the screen layout for configuring the outgoing
dialing parameters for second dial tone on the R2MFC MBM.
Figure 26 Outgoing dialing configuration for second dial tone