Nortel Networks 4050 사용자 설명서
134 Chapter 4 Configuring the domain
320818-A
Using the quick TunnelGuard setup wizard in the CLI
To configure the settings for the SRS rule check using the TunnelGuard quick
setup wizard, use the following command:
setup wizard, use the following command:
/cfg/domain #/aaa/tg/quick
The TunnelGuard quick setup wizard is similar to the last few steps of the Nortel
SNAS 4050 domain quick setup wizard. The wizard prompts you for the
following information:
SNAS 4050 domain quick setup wizard. The wizard prompts you for the
following information:
•
the action to be performed if the TunnelGuard check fails (see
•
whether you want to create a test user (see
)
details on|off
Specifies whether SRS failure details can be displayed
on the portal page.
on the portal page.
Valid options are:
•
on
— details will be displayed
•
off
— details will not be displayed
The default is
off
.
If set to
on
, the client can click on the TG icon on the
portal page to display details about which elements of
the SRS rule check failed.
the SRS rule check failed.
loglevel
fatal|error|warning|
info|debug
fatal|error|warning|
info|debug
Sets the log level for debug information from the
TunnelGuard applet. The options are:
TunnelGuard applet. The options are:
•
fatal
— displays fatal errors only
•
error
— displays all errors
•
warning
— displays warning information about
conditions that are not error conditions
•
info
— displays high-level information about
processes
•
debug
— displays detailed information about all
processes
The default is
info
.
The information displays in the client’s Java Console
window. You can use the information to track errors in
the TunnelGuard SRS rules.
window. You can use the information to track errors in
the TunnelGuard SRS rules.
/cfg/domain #/aaa/tg
followed by: