Nortel Networks 4050 사용자 설명서

Chapter 6 Configuring authentication 273

Nortel Secure Network Access Switch 4050 User Guide

 

Enter the authentication server information in the applicable fields.

 describes the Add an Authentication Server —Radius fields.

Click Apply.

The RADIUS authentication method displays in the Authentication Server 
Table.

Click Apply on the toolbar to send the current changes to the Nortel 
SNAS 4050. Click Commit on the toolbar to save the changes permanently.

You can modify the RADIUS configuration in the following ways:

•

Modify settings for the authentication method itself (see 

).

Add an Authentication Server — Radius fields

Index

Specifies an integer in the range 1 to 63 that uniquely 
identifies the authentication method on the Nortel 
SNAS 4050.

Name

Specifies a name for the authentication method, as a 
mnemonic aid. 

The maximum allowable length of the name string is 255 
characters, but Nortel recommends a maximum of 32 
characters.

Future releases of the Nortel SNAS 4050 software will 
allow you to reference this name in a client filter, so 
authentication to this server becomes a condition for 
access rights for a group.

Display Name

Specifies a name for the method, to display in the Login 
Service list box on the portal login page, together with the 
names of other authentication services available.

IP Address

Specifies the IP address of the RADIUS server.

Port

Specifies the port number configured for this server to use 
on the RADIUS server. The default is 1812.

Secret

Specifies a unique shared secret configured on the 
RADIUS server that authenticates the Nortel SNAS 4050 
to the RADIUS server.