Nortel Networks 4050 사용자 설명서

466 Chapter 10 Configuring system settings

320818-A

 

The Cluster Host menu includes the following options:

/cfg/sys/host <host ID>

followed by:

ip <IPaddr>

Sets the Real IP address (RIP) for Interface 1 on the 
device. The RIP is the Nortel SNAS 4050 device host 
IP address for network connectivity and must be unique 
on the network. For more information, see 

.

Changing the RIP using this command does not affect 
the MIP for the cluster.

sysName <name>

Assigns a name to the managed Nortel SNAS 4050 
host. The name is a useful mnemonic when managing 
the Nortel SNAS 4050 using SNMP.

sysLocatio <location>

Identifies the physical location of the managed Nortel 
SNAS 4050 host. The location description is a useful 
mnemonic when managing the Nortel SNAS 4050 
using SNMP.

license <key>

Installs the license key for the type of license you have 
purchased. The Nortel SNA SSL (portal and Nortel 
SNAS 4050 domain client access) license is available 
for 100, 250, 500, and 1000 users.

•

 is text you paste in. The license key text is 

supplied to you by Nortel Technical Support. When 
pasting, ensure you include the 

BEGIN LICENSE

 

and 

END LICENSE

 lines.

To obtain a license key, first use the 

 

command to find out the MAC address of the Nortel 
SNAS 4050 device. Then provide the MAC address to 
Nortel Technical Support and request the key for the 
desired license type.

gateway <IPaddr>

Sets the default gateway address for the device. The 
default gateway is the IP address of the interface on the 
core router that will be used if no other interface is 
specified.

To specify a default gateway for Interface 1 traffic, use 
the 

 command (see 

).

routes

Accesses the Host Routes menu, in order to manage 
static routes for the Nortel SNAS 4050 when there is 
more than one interface (see 

). 

interface 
<interface number>

Accesses the Host Interface menu, in order to 
configure an IP interface (see