Nortel Networks 4050 사용자 설명서
476 Chapter 10 Configuring system settings
320818-A
The Date and Time menu includes the following options:
Managing NTP servers
You can add NTP servers to the system configuration to enable the NTP client on
the Nortel SNAS 4050 to synchronize its clock. To compensate for discrepancies,
it is recommended that NTP have access to at least three NTP servers.
the Nortel SNAS 4050 to synchronize its clock. To compensate for discrepancies,
it is recommended that NTP have access to at least three NTP servers.
To manage NTP servers used by the system, use the following command:
/cfg/sys/time/ntp
The NTP Servers menu displays.
/cfg/sys/time
followed by:
date <date>
Sets the system date.
•
date
is the date in YYYY-MM-DD format.
time <time>
Sets the system time.
•
time
is the time in HH:MM:SS format, using a
24-hour clock.
tzone
Specifies the time zone. You are prompted to enter a
continent or ocean area, a country, and a region (if
applicable). To view available input options, press
Enter to accept the default (
continent or ocean area, a country, and a region (if
applicable). To view available input options, press
Enter to accept the default (
select
) in order to
display selection menus for each item.
ntp
Accesses the NTP Servers menu, in order to manage
NTP servers used by the cluster (see
NTP servers used by the cluster (see