Nortel Networks 4050 사용자 설명서
524 Chapter 10 Configuring system settings
320818-A
Adding interface ports
To add ports to the selected interface, perform the following steps:
1
Select the System > Hosts > host > interface > Port tab.
The Port screen appears (see
).
2
Click Add.
The Add a Port dialog appears.
3
Enter the port information in the applicable fields.
describes the
Add a Port fields.
4
Click Add.
The new port appears in the Port Table.
5
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Removing interface ports
To remove ports assigned to an interface, perform the following steps:
1
Select the System > Hosts > host > interface > Port tab.
The Port screen appears (see
).
2
Select the port from the Port Table.
3
Click Delete.
A confirmation dialog appears.
4
Click Yes.
Table 103
Add a Port fields
Field
Description
Port Number
Specifies the port number of the physical port on the
device.
device.