Nortel Networks 608(WL) 사용자 설명서
Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1
86
3.5.5 VPN-Client Page
VPN-Client
page layout
The VPN-Client page allows you to define VPN Client Descriptors.
Client descriptor name
This name is used internally to identify the VPN client Descriptor. This name
appears in the Client/Server list on the Peer Profiles page.
appears in the Client/Server list on the Peer Profiles page.
Configuring XAuth
When you want to use Extended Authentication, you can fill out an XAuth
Username and Password in the optional fields. Storing these parameters in the VPN
Client Descriptor is required for always-on connections.
Username and Password in the optional fields. Storing these parameters in the VPN
Client Descriptor is required for always-on connections.
Gateway Vendor
The SpeedTouch™ can interact with VPN servers of various vendors. Because some
vendors implement proprietary features, it is required to select the Gateway
Vendor.
vendors implement proprietary features, it is required to select the Gateway
Vendor.
Following vendors can be selected:
The configuration of a VPN client scenario is described in detail in section
and following. The application-oriented VPN
Client Web page is the recommended way to configure a VPN client.
The XAuth Password is not shown in clear text. In order to protect from
typing errors, you have to confirm your entry.
typing errors, you have to confirm your entry.
The use of XAuth is further explained in section
and following.
Select ...
when ...
generic
the VPN server is either a SpeedTouch™ or the vendor is
unknown.
unknown.
Cisco
you connect to a Cisco VPN server. Cisco requires a
Group ID to be specified for the VPN clients (see
Group ID to be specified for the VPN clients (see
Nortel
you connect to a Nortel VPN server. (Certificate
authentication only.)
authentication only.)