Ericsson W2x Series 사용자 설명서

221 02-FGB 101 327 Uen C – December 2006 

21 

 

• Call 

Hold 

• Multi 

Party 

Service 

•  Barring of All Outgoing Calls 
•  Barring of Outgoing International Calls 

•  Barring of Outgoing Internal Calls except those directed to the 

Home PLMN Country 

•  Barring of All Incoming Calls 

•  Barring of Incoming Calls when Roaming Outside the Home 

PLMN Country. 

The Ericsson W25 supports E.164 numbering. There are three ways to 
indicate that the dialed number sequence is complete: 

•  Dialing the EON key (e.g. # or *) immediately sends the call. 

•  An Inter Digit Timer (IDT) is used to check the dialing process. 

•  A specified number of digits must be dialed before the call is 

placed. 

 

The EON key is configurable as well as the IDT. 

It is possible to do number modifications, e.g. remove and/or add digits to a 
dialed number. 

The dial plan consists of a pattern string to match dialed digits, and the 
ability to strip, append prefix digits, and/or append suffix digits. 

A local prefix can automatically be added to a dialed local number. This is 
useful in places where the PSTN does not require the local prefix in local 
calls. 

Fixed Number Dialing is supported when a SIM providing this service is 
installed. When enabled, only calls to fixed numbers stored on the SIM are 
allowed. 

A local fax call is detected through a unique prefix before the phone 
number. The fax prefix is configurable and is removed before the T.38 call 
is setup. 

The UMTS/GMS supplementary service codes (i.e. #67# etc) is possible to 
configure with a service code of choice, in order to have the same service 
codes as in a fixed network.