Tandberg Data Tandberg SDLT600 Ext 8102-6933-00 사용자 설명서
제품 코드
8102-6933-00
Specifications | E1
E Tape Drive Information
E1
Specifications
This section lists dimensions, physical specifications,
functional specifications, and maximum data transfer rates
for the SDLT 600 tape drive.
functional specifications, and maximum data transfer rates
for the SDLT 600 tape drive.
Maximum Data Transfer Rate
The following table shows the maximum and burst data
transfer rates for the SDLT 600 tape drive.
transfer rates for the SDLT 600 tape drive.
Configuration
Native
Compressed
*
* The compression rates shown assume an industry standard 2:1 compression ratio.
Actual compression ratios achieved depend on the redundancy of data files being
recorded.
recorded.
Burst Max
†
† Burst speeds are limited by the SCSI bus itself, or by the Fibre Channel transceiver, not
the design of the SDLT 600 tape drive or the Super DLTtape II data cartridge.
SCSI Ultra 160 (LVD mode)
36 MB/sec
72 MB/sec
160 MB/sec
SCSI Ultra 160 (MSE LVD mode) 36 MB/sec
72 MB/sec
160 MB/sec
SCSI Ultra 160 (SE mode)
36 MB/sec
40 MB/sec
40 MB/sec
Fibre Channel (1 Gb/s)
36 MB/sec
72 MB/sec
100 MB/sec
Fibre Channel (2 Gb/s)
36 MB/sec
72 MB/sec
200 MB/sec