Tandberg Data Tandberg SDLT600 Ext 8102-6933-00 사용자 설명서
제품 코드
8102-6933-00
A3 | Loading and Unloading Data Cartridges
A3
Loading and Unloading
Data Cartridges
Data Cartridges
To Load a Data Cartridge
1.
Insert the data cartridge into the receiver on the front of the
tape drive.
tape drive.
2.
Push the cartridge completely into the receiver.
The green Drive Status LED (
flashes as the tape loads.
When the tape reaches the Beginning of Tape (BOT) marker,
the Drive Status and Drive Density LEDs (
the Drive Status and Drive Density LEDs (
light
steadily, indicating that the cartridge is ready for use.
Note:
The Drive Density LED is green when a
Super DLTtape II cartridge is inserted; orange when a
Super DLTtape I or DLTtape VS1 cartridge is inserted;
and off when no cartridge is inserted or an incompatible
cartridge is inserted (
Super DLTtape II cartridge is inserted; orange when a
Super DLTtape I or DLTtape VS1 cartridge is inserted;
and off when no cartridge is inserted or an incompatible
cartridge is inserted (
). For information about
choosing data cartridges,
To Unload a Data Cartridge
1.
Press the Eject button on the front bezel.
The tape drive completes writing data to the tape, and the
Drive Status LED (
Drive Status LED (
) flashes as the tape rewinds.
When the tape reaches the BOT marker, the tape drive ejects
the data cartridge. The Drive Status LED lights steadily, and
the Drive Density LED:
• Remains green if you ejected a Super DLTtape II cartridge
• Turns off if you ejected a backward-read cartridge.
the data cartridge. The Drive Status LED lights steadily, and
the Drive Density LED:
• Remains green if you ejected a Super DLTtape II cartridge
• Turns off if you ejected a backward-read cartridge.
2.
Remove the cartridge from the tape drive and return it to its
plastic case (
plastic case (
Eject