Mackie OPT-24 사용자 설명서

Installa

tion Guide

To select the OPT•24 from the screen
(HDR24/96 only):
1. Select Setup from the Windows menu and

click the Digital I/O icon. The Digital I/O
Setup dialog box shows you the current
settings for each of the three I/O cards.

2. Click the Input pulldown menu and select the

input source you want to use for each I/O
card.

3. The OPT•24 outputs are always active, so no

configuration is necessary for the outputs.

This is done in the same way that you setup and

configure the other I/O cards—in the Digital I/O
Setup window (or by pressing the Digi-I/O button on
the front panel).

To select the OPT•24 from the front panel:
1. Press Digi-I/O to enter the Digital I/O Card

Setup screen.

DISK UTIL SYSTEM

DIGI-I/O

SYNC

DEC

2. Select In. The Setup Tape Inputs screen

shows you the current settings for each of the
three I/O cards.

 DIGITAL I/O Card Setup

          Stat  Rate
 In  Out  Bits  Convert  

3. Press the Select button corresponding to each

I/O card and toggle the selection to the
desired input source.

4. The OPT•24 outputs are always active, so no

configuration is necessary for the outputs.

5. When done, press the Digi-I/O button to exit

the menu.

“Mackie,” the “Running Man” figure, and “OPT•24”
are trademarks or registered trademarks of Mackie
Designs Inc. All other brand names mentioned are
trademarks or registered trademarks of their
respective holders, and are hereby acknowledged.

© 2002 Mackie Designs Inc.
All Rights Reserved.
Printed in the U.S.A.

IN 17-24

OUT 17-24

IN 9-16

OUT 9-16

IN 1-8

OUT 1-8