LSI 1600 사용자 설명서

     MegaRAID Enterprise 1600 Hardware Guide

Windows NT

Installation

When Windows NT is installed via a bootable CD, the
devices on the MegaRAID will not be recognized until
after the initial reboot. The Microsoft documented
workaround is in SETUP.TXT:

SETUP.TXT is on the CD.

To install drivers when Setup recognizes one of the
supported SCSI host adapters without making the devices
attached to it available for use:

1

Restart Windows NT Setup.

2

When Windows NT Setup displays

Setup is inspecting your computer's 
hardware Configuration...,

press <F6> to prevent Windows NT Setup from
performing disk controller detection. This  allows 
you to install the driver from the Drivers disk you 
created. All SCSI adapters must be installed manually.

When Windows NT Setup displays

Setup could not determine the type 
of one or more mass storage devices 
installed in your system, or you 
have chosen to manually specify 
an adapter,

press S to display a list of supported SCSI host
adapters.

4

Select Other from the bottom of the list.

5

Insert the Drivers Disk you made when prompted
to do so and select MegaRAID from this list. In
some cases, Windows NT Setup repeatedly
prompts to swap disks. Windows NT will now
recognize any devices attached to this adapter.
Repeat this step for each host adapter not already
recognized by Windows NT Setup.