EIKI MD13NET 사용자 설명서
15
Network Board
OWNER’S MANUAL
Network configuration
ENGLISH
Configure the network with the
projector
projector
Turn the projector on and
display the network setting
menu on the screen.
display the network setting
menu on the screen.
Configure the network through
the projector's menu.
the projector's menu.
Restart the Network Board
Configure the network with computer
Temporarily set up the computer's
network with the default network
number of the Network Board.
network with the default network
number of the Network Board.
Restart the Computer, if required
Using the web browser and login to
the setting page of the Network
Board by accessing the default IP
address.
the setting page of the Network
Board by accessing the default IP
address.
Change the network address you
want to connect to the existing
network through the setting menu
on the browser.
want to connect to the existing
network through the setting menu
on the browser.
Restart the Network Board
Reset to the computer's original
network configuration.
network configuration.
Completing the network configuration. Perform the
basic setting and operation of the projector by using
the web browser. Please see chapter "Basic Setting"
on page 25 for further information.
basic setting and operation of the projector by using
the web browser. Please see chapter "Basic Setting"
on page 25 for further information.
A
B
Please see further
informatin on pages
16-17.
informatin on pages
16-17.
Please see further
informatin on pages
18-23.
informatin on pages
18-23.
Please see further
informatin on pages
25-31.
informatin on pages
25-31.
Example of projector's configuration
IP Address : 192.168.1.201
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 0.0.0.0
IP Address : 192.168.1.201
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 0.0.0.0
Example of projector's configuration
IP Address : 192.168.0.5
Subnet Mask : 255.255.255.0
Default Gateway : (blank)
DNS : (blank)
IP Address : 192.168.0.5
Subnet Mask : 255.255.255.0
Default Gateway : (blank)
DNS : (blank)
Default Network Address of the Network
Board
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Board
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Example of projector's configuration
IP Address : 192.168.1.201
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 0.0.0.0
IP Address : 192.168.1.201
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 0.0.0.0
p.18
p.16
Procedure of Connecting the projector to the network
[4] Network configuration
When you connect a projector to a network, the network number of projector must
be the same as the network you intend to connect. You should configure projector’s
network first. Make sure that the projector is connected to the network correctly.
There are 2 ways to configure the network, by using the projector’s menu
be the same as the network you intend to connect. You should configure projector’s
network first. Make sure that the projector is connected to the network correctly.
There are 2 ways to configure the network, by using the projector’s menu
[A]
, or by
using the computer
[B]
. Refer to the chart below and use the method you prefer.