VIVOTEK IP3111/IP3121 사용자 설명서

www.vivotek.com

886-2-22404099

886-2-22404097

One-shot fast configuration via FTP

For quick setup of NetworKam, the administrator can utilize the default CONFIG.INI that may be

downloaded from the FTP daemon of NetworKam. To log into the FTP daemon, enter “root” as the user

name and the same password used when connecting to the Web server. The serial number of NetworKam

is the password for the initial access.

Then administrators only need to modify necessary fields and then upload the file to NetworKam with the

file name “CONFIG.INI”. To reduce error in interpretation, it is recommended that the downloaded

template CONFIG.INI be modified using the options following each item in the sample below. The file

will include seven categories: [SYSTEM], [NETWORK], [VIDEO], [SERIAL], [ALERT],and

[LAYOUT]. The category name in brackets should be in upper case. The item name in angle braces

should be in lower case. Some items related to disable/enable should use the keywords “YES”/“NO”. The

number zero entry in <user name> and <user password> is for the administrator, i.e. “root”.

Since the password when logging into FTP is not encrypted, it is recommended to use the Web instead of

FTP to configure the system afterwards. If some parameters other than the network or camera drivers are

changed, administrators can set <reset system> to NO to avoid resetting the system. It will automatically

return to YES during the next downloading of CONFIG.INI.

A sample CONFIG.INI is attached below. The italic text following each line describes the format of the

field and the bold italic characters are the possible values of each field.

******* sample file **********

NetworKam Initial Configuration File

[SYSTEM]

YES

Reset system after reading CONFIG.INI or NO

NetworKam

String shorter than 40 characters