VIVOTEK IP3111/IP3121 사용자 설명서

 

 
 
 
 
 

www.vivotek.com

 

  

T: 

886-2-22404099 

  

F: 

886-2-22404097 

 

 
 
 
 
 
 

72

NetworKam has a Telnet daemon for administrators to access some seldom used functions. Using any 

general terminal program to connect to NetworKam will prompt the user for a password. Username is not 

requested here since only administrators can access the Telnet daemon. The password is as same as that 

used for web access. After logging in, type "help" for the command list. If "debug" or "dinote" is not 

executed, Telnet will disconnect automatically after being idle for 1 minute.   

General activities are recorded into SYSTEM.LOG continuously, but information about abnormal status 

is not. To look deep into the core debugging information, administrators may type the “debug” command. 

This will cause NetworKam to start dumping the detailed debugging information while the system is 

running. This is useful to examine if any error has occurred when the system operates abnormally. The 

stored information will be cleared automatically after the dump. NetworKam will continue to dump new 

messages unless the connection is broken. If Telnet is not connected, any messages will be stored until 

administrators re-login.   

Typing "dinote" will make NetworKam send the current status of digital input. After that NetworKam will 

continuously monitor DI status and send messages only when the state has changed. For example, after 

typing "dinote" the terminal will display   

DI=L 

DI=L 

and if DI changes to H, terminal will display only 

DI=H 

 

Typing "stop" will cease dumping debug information and digital input status. 

 

Typing "diquery" will display the status of digital input once.