Printronix Network Interface Card 사용자 설명서

다운로드
페이지 378
Current Log Path Settings
79
Specifies whether alerts from the enabled alert group categories for 
this configuration will be sent to the specified e-mail address.  If this 
option is enabled, the following information must be entered:
E-mail Address - specifies an e-mail address to which alert 
information will be sent
Short E-mail Format - specifies whether a short (15-80 
character) alert e-mail message should be sent. 
If enabled, the message will contain the alert description, the 
severity level, device description, and device name (unless the 
length of the message exceeds the Short E-mail Message 
Length, in which case the message will be truncated).
If disabled, the message will contain additional information 
including the device description, device name and location, 
alert description, alert group, alert severity level, and printer 
status.
Default: Disabled
Short E-mail Message Length - Specifies the maximum size of 
the short e-mail message. Acceptable values are 15 to 80 
characters.
Default: 80 characters
Send Test Message - Provides a way to test the validity of the 
e-mail address/SMTP server address. If checked, a test 
message will be sent to the specified e-mail address when the 
submit button is pressed.
Default: All alert groups are disabled by default.
If the alert message is to be sent to a cellular phone or pager, the 
Short E-mail Format option should be enabled. Once this option is 
enabled, you may specify the maximum e-mail message length 
(15-80 characters). When enabled, the message will contain the 
alert description, the severity level, device description, and device 
name (unless the length of the message exceeds the Short E-mail 
Message Length, in which case the message will be truncated).
SNMP Configuration