Printronix Network Interface Card 사용자 설명서

95

3.

Use the arp command to add an entry into the Windows 
station ARP table for the NIC. This is the most common syntax 
for this command:

Syntax:

arp -s ipaddress ethernetaddress

Example for Microsoft

®

 TCP stacks:

arp -s 192.75.11.9 00-80-72-07-00-60

This example specifies a NIC using IP address 192.75.11.9 
and Ethernet address 00-80-72-07-00-60.

4.

Check if the ARP entry was accepted.

You should see an entry in the listed ARP table with the IP 
address and Ethernet address specified in Step 3.

5.

 this IP address to see if the NIC can be seen on your 

network.

At this point, you should be able to communicate with the NIC