PowerFile A3 사용자 설명서

Active Archive Appliance (A3) v6.5

PowerFile Confidential

 Racking and Installation Guide

The rails are shipped together, with the inner rail located inside the outer rail.You’ll need to 
separate the two rails and then attach the inner rails and latches to the Archive Engine prior to 
mounting the device into the rack. The rails are attached with the screws provided in the 
shipping box.

The rack must be assembled with the left and right chassis components correctly oriented. In this 
assembly, the “left” and “right” correspond to the left and right sides of a person facing the rack 
assembly.

The rail assembly is designed to prevent the Archive Engine from being removed completely; 
however, the rack will allow access to the fan tray. If the device must be completely removed, 
you must rotate the right side chassis latch up and the left side chassis latch down. You will then 
be able to remove the device.

Before getting started with installation, review the illustrations in this section and identify the 
rail kit parts that are required for assembly. 

 identifies the rail kit hardware for the 

Archive Engine (Generation 1).

Note:  An Allen wrench and Torx screwdriver are provided for installation; however, you will need to 
provide a Phillips head screwdriver.

M3x4 Button Head 
Screw

10

Mounting inner rails to Archive 
Engine chassis

ATX Chassis Latch and 
Screws

2

Mounted to inner rail to restrict 
chassis withdrawal