Rosewill RNX-N150UBE 사용자 설명서

Wireless N Adapter 

RNX-N150UBE                                                           User Manual 

 

If there is more than one AP on the PBC mode, there will be session overlap. Please 

using method 1 PIN Input Config(PIN) or wait for a while push the button again.

 

This chapter provides solutions to problems that may occur during the installation 

and operation of the Wireless USB Adapter. Read the descriptions below to solve your 

problems.  

Reinsert the Wireless USB Adapter into your PC’s USB slot. Right click My 

Computer and select Properties. Select the device manager and click on the 

Network Adapter. You will find the Adapter if it is installed successfully. If you see 

the yellow exclamation mark, the resources are conflicting. You will see the 

status of the Adapter. If there is a yellow question mark, please check the 

following: 

Make sure that you have inserted the right adapter and installed the proper driver. 

If the Adapter does not function after attempting the above steps, remove the 

adapter and do the following: 

Uninstall the driver software from your PC through Control Panel’s “Add or 

Remove Programs”. 

Restart your PC and repeat the hardware and software installation as specified in 

this User Guide. 

Make sure that the PC to which the Adapter is associated is powered on. 

Make sure that your Adapter is configured on the same channel and with the 

same security options as with the other computers in the Infrastructure 

25