Zhone Technologies 600 사용자 설명서
Server Cards
2-5
FRS Card
ACS-FRS Card User Screens and Settings
Table 2-1. ACS-FRS Card Main Screen Actions
Table 2-2. ACS-FRS Card Main Screen Option Settings and Defaults
Notes:
1. ansi, ccitt, and lmi can only be selected when Port Type is changed to any selection
other than none.
2. When Port Type is u-dce or nni, this parameter will let you change the Error Threshold,
Poll Verify Timer, and Events Counter settings.
3. When Port Type is u-dte or nni, this parameter will let you change the Error Threshold,
Poll Interval Timer, Events Counter, and Full Status Frequency.
4. Press <Enter> to select the desired Congestion Threshold percentages.
5. If connected to a user port, this displays user slot number and port (e.g. U1-2).
Action
Function
Save
Saves changes to settings.
Undo
Returns all settings to the last saved state.
Refresh
Redraws the screen.
< and >
Lets you scroll through the 68 logical ports assignable on each ACS-FRS
card.
card.
Endp
Brings up the PVC Endpoints Screen where endpoints for each PVC are
assigned. See the PVC Endpoints Screen section of this chapter.
assigned. See the PVC Endpoints Screen section of this chapter.
Circ
Brings up the Circuits Screen where alternate endpoints and endpoint
switching are assigned. See the Circuits section of this chapter.
switching are assigned. See the Circuits section of this chapter.
Perf
Initiates Port Performance Monitoring of the selected ACS-FRS card port.
Refer to Port Performance Data section of this chapter.
Refer to Port Performance Data section of this chapter.
Lmi
Brings up the LMI Screen where additional performance statistics are
stored. See the LMI section of this chapter.
stored. See the LMI section of this chapter.
Glob
Brings up the Global Screen that identifies the ACS-FRS card by IP number
and netmask. See the Global Setup section of this chapter.
and netmask. See the Global Setup section of this chapter.
Main
Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.
saved, you will be prompted to save or lose changes.
Parameter
User Options
Notes
Default
STATE
stdby actv
stdby
WAN/SRV
none w1-1 w1-2 w2-1 w2-2 w3-1
w3-2 w4-1 w4-2
w3-2 w4-1 w4-2
none
TS
n/a table
n/a
RATE
64k
64
PORT TYPE
none u-dce nni u-dte frad
none
LOOPBACK
off line local
off
LMI
none ansi ccitt lmi
1
none
DCE PARAM
n/a enabl
2
n/a
DTE PARAM
n/a enabl
3
n/a
ASYNC
no yes
no
CONG THRS
enabl 1%-100%
4
enabl (95%)